SW2 G1/4
UV Intensity Sensor
► Model: SW2 ► Range: 0~20000uW/cm2 ► Resolution: 10uW/cm2 ► Working voltage: 5VDC ► Current output: (4-20mA, 0-5V) ► Cable length: 2.5 meters ► Waterproof: 10 kg ► Weight: 430g ► Thread : G1/4 ► Please refer to the brochure for details * Measuring range can be customized.
Overview
SW2 G1/4 UV intensity sensor
- Measure ultraviolet (UV) light relative/absolute UV intensity
- The low-cost, high-accuracy sensor that is ideal for air purifiers and UV sterilizers
- Analog output (4-20mA, 0-5V)
- An easy-to-use, superior long-time stability and corrosion resistance.
- For low-pressure UV lights
Main Features
- The “SW2 G1/4 UV sensor” is a UV sensor with a G1/4″ thread for operation in water. It is 10 bar water pressure resistant and is typically used for monitoring low-pressure UV lights in pressurized water. It will be configured on individual requirements which are clarified within the order process. Configurable parameters are the signal output type, the measurement range, and the spectral responsivity. The signal output is configurable as a 0…5V voltage output or 4…20mA current loop or photodiode output
General Specification
| Parameter | Value |
| Response Spectrum | 210~280nm(UVC) |
| Peak Response Spectrum | 253.7num |
| Output Signal | (4-20mA, 0-5V) |
| Power Supply | (5vDC ,12v DC ,24v DC) |
| Load impedance | >1k |
| Mode of Connection | 3 wire |
| Measuring Range | 0~20000uw/cm² |
| Power Consumption | <0.5w |
| Operating Temperature | -10~60 ℃ |
| Storage Temperature | -10~70 ℃ |
| Shell Material | SUS316L |
| Screw Specification | G1/4” |
| Cable Model | RVVP 3*0.2 2.5M long |
Other details
Connect Type: Wiring or other Connectors aviation plug available
Environmental Conditions: -10～70℃ (no ice or condensation)
Net Weight: 430g
Gross Weight: 510g ~630g
Warranty: 12 months
For support, please visit support center or email us at sale@aposunmeter.com
1 × SW2 G1/4 UV sensor
Package type: plastic bag with box